Satek Orange Spin Casting Rubber

Satek Orange Spin Casting Rubber 90 °C

Gama de moldes de muy alta resistencia térmica para zamak

СИЛИКОНОВАЯ РЕЗИНА ДЛЯ ЦЕНТРОБЕЖНОГО ЛИТЬЯ

wdt_ID	SATEK	ORANGE
1	Hardness (Shore)	56 - 54
2	Vulcanization Temp.	80 / 90 °C
3	Vulcanization Time	40 / 25 min
4	Shrinkage	≤2%

Satek Orange Silicone Rubber For Centrifugal Casting with good thermal resistance for pieces of small and medium size.

Satek Orange Silicone Rubber For Centrifugal Casting provides high levels of strength, close tolerances and excellent reproduction of detail

It produces high-quality parts in commercial grade:

Tin Alloys
Lead Alloys
Bismuth Alloys
Polyurethane and Polyester Resins

The required vulcanization time prolongs with increasing thickness of the rubber layer.

The factors that affect the shrinkage rate of the rubber compound: the higher the curing temperature, the greater the shrinkage rate. In general, the temperature of each increase of 10 degrees C, the shrinkage rate increased by 0.2% ~ 0.5%

DO NOT immerse the bracket in cold water.

We recommend to extract the silicone mould from the bracket where it was polymerized only when its temperature reaches room temperature.

The model to be embedded in Mold Rubber must be perfectly clean and dry for production of the best possible molds

Available in a variety of diameter and thickness

Thickness : 5 – 6 – 7 – 8 – 9 – 10 mm

Diameter : 230 – 250 – 300 – 350 – 400 mm

Product Sizes

wdt_ID	Product Size	Diameter (mm)	Thickness (mm)	Est. Weight (Kg)
1	Standard Product Size	300	8	1 Pair = 2 Pieces = 2 - 2.3 Kg
2	Product Size	300	10	1 Pair = 2 Pieces = 2.3 - 2.6 Kg
3	Product Size	23	8	1 Pair = 2 Pieces = 1 - 1.3 Kg