Satek Brown Jewelry Molding Rubber 180 °C
| wdt_ID | SATEK | BROWN |
|---|---|---|
| 1 | Hardness (Shore) | 38 - 40 |
| 2 | Vulcanization Temp. | 170 / 180 °C |
| 3 | Vulcanization Time | 25 / 15 min |
| 4 | Shrinkage | ≤2% |
Brown Mold Rubber gives waxes a smooth, shiny finish that won’t stick to the mold and shiny waxes mean less finishing.
Brown Mold Rubber ideal to be used also as an insert. Its enough strength gives this rubber high elasticity during waxes extraction, especially for the most complicated and delicate ones
- Competitive price
- Smooth shiny waxes
- Easy to cut and easy to use
- Make complex molds
Siliconas Microfusión Marrón 180 °C
Резина силиконовая Коричневый 180 °C
The required vulcanization time prolongs with increasing thickness of the rubber layer.
Safe temperature: 135°C longer than 20 minutes.
Typical temperature: 175°C about 12 minutes.
DO NOT immerse the bracket in cold water.
The model to be embedded in Jewelry Mold Rubber must be perfectly clean and dry for production of the best possible molds
Available in a variety of thickness
Thickness : 5 – 6 – 7 – 8 – 9 – 10 mm
Jewelry Mold Rubber Standard Product Size
wdt_ID Product Size W (mm) L (mm) H (Thickness) (mm) Average Weight (gr)
1
Standard Product Size
300
300
8
800 - 1100
Jewelry Mold Rubber Package for Standard Size
wdt_ID Package Size (WxLxH) Width (cm) Length (cm) Height (cm) Quantity (pcs) Est. Gross Weight (Kg)
1
Small Box Size
32
32
5
6
6 - 7
2
Big Box Size
33
33
32
30
25 - 30
3
Pallet Size
80
120
110
540
530 - 580
