Satek Brown Spin Casting Rubber

Satek Brown Spin Casting Rubber 180 °C

Gama de moldes de muy alta resistencia térmica para zamak

СИЛИКОНОВАЯ РЕЗИНА ДЛЯ ЦЕНТРОБЕЖНОГО ЛИТЬЯ

wdt_ID	SATEK	BROWN
1	Hardness (Shore)	55 - 53
2	Vulcanization Temp.	180 / 190 °C
3	Vulcanization Time	45 / 30 min
4	Shrinkage	≤2%

Satek Brown Silicone Rubber For Centrifugal Casting with good thermal resistance for pieces of medium and small size. Soft rubber, with exceptional mechanical features that make it perfect for extraction of particular complex items

Satek Brown Silicone Rubber For Centrifugal Casting provides high levels of strength, close tolerances and excellent reproduction of detail.

Produce highly detailed decorative, novelty objects and hardware items with high quality and finish

It produces high-quality parts in commercial grade:

Zinc Alloys(Zamak)
Tin Alloys
Lead Alloys
Bismuth Alloys
Polyurethane and Polyester Resins

The required vulcanization time prolongs with increasing thickness of the rubber layer.

The factors that affect the shrinkage rate of the rubber compound: the higher the curing temperature, the greater the shrinkage rate. In general, the temperature of each increase of 10 degrees C, the shrinkage rate increased by 0.2% ~ 0.5%

DO NOT immerse the bracket in cold water.

We recommend to extract the silicone mould from the bracket where it was polymerized only when its temperature reaches room temperature.

The model to be embedded in Mold Rubber must be perfectly clean and dry for production of the best possible molds

Available in a variety of diameter and thickness

Thickness : 5 – 6 – 7 – 8 – 9 – 10 mm

Diameter : 230 – 250 – 300 – 350 – 400 mm

Product Sizes

wdt_ID	Product Size	Diameter (mm)	Thickness (mm)	Est. Weight (Kg)
1	Standard Product Size	300	8	1 Pair = 2 Pieces = 2 - 2.3 Kg
2	Product Size	300	10	1 Pair = 2 Pieces = 2.3 - 2.6 Kg
3	Product Size	23	8	1 Pair = 2 Pieces = 1 - 1.3 Kg